Hitachi HCX5000I - Manual (Page 15)

T HE D ISPLAY S ELEC S ET 500A U SER G UIDE
1-4 HCXTD840, Issue 1, July 2001
Display
components A line-by-line explanation of the display follows.
Line Function
1 Provides the time and date, your station
number, and the number of calls waiting.
The calls waiting display registers incoming
3- or 4-digit trunk calls, internal calls,
information (dial 0) calls and recalls
(outside calls that are transferred to a station
that does not answer and automatically
return to your console). While users in your
facility call you by dialing 0, you also have
your own 3- or 4-digit station number.
2 through 5 Represent call appearances. Four call
appearances keys, or CAPs, labeled CAP,
CAP2, CAP3 and CAP4 are provided. Each
CAP can be used to represent a single call.
CAPs are located above and to the left of the
keypad. They are discussed in more detail
under
“Displaying Caller ID Information”
on page 1-7.
6 and 7 Display information about hold loops. Four
hold loops (HLD1-HLD4) are usually
provided on your SelecSet. These hold
loops are located above and to the right of
the keypad. Hold loops are discussed in
greater detail under
“Displaying Caller ID
Information” on page 1-7.
8 The soft key menu lets you retrieve
messages, view the charge for the last
outgoing call made from the console, and
control certain station features. See
“Soft
Keys” on page 1-18 for more information.