Hitachi HCX5000I - Manual (Page 144)

C HAPTER 2: A DDITIONAL O PERATIONS
C ODE C ALLS
HCXTD840, Issue 1, July 2001 2-73
To answer a
code call To answer a code call:
1 Press the flashing <CODE> key (or the <ANS> key).
To access the zone paging system
2 Press the <ZPG> key or dial the zone paging access
code.
3 Dial the proper zone number.
4 Make your announcement.
See “Paging” on page 2-79 for more on zone paging.
Note: Code calling is sometimes used with radio paging
systems to signal voice or tone beepers. To use
radio paging, press the radio paging key or dial
the radio paging access code. Dial the specific
beeper identification number (BID). (See
page 2-81 for more on radio paging.)