Hitachi HCX5000I - Manual (Page 178)

C HANGING THE R INGING L EVEL
HCXTD840, Issue 1, July 2001 A-7
Changing the Ringing Level
Procedure To change the ringing level:
1 While displaying any ringing frequency (500,
400/500, 400/600, 500/600), press <R-LEV>. The
normal ringing level (or volume) is demonstrated, and
the ringing level field indicates Normal. See
Figure A-4 .
Figure A-4: Normal ringing level (volume)
2 To change the ringing levels to low, press <R-LEV> a
second time. The ringing level is changed to low as
shown in
Figure A-5 .
Figure A-5: Ringing level changed to low
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
500Hz
NORMAL
LINE-LINE (USA)
R-FRQ R-LEV R-PTN DA ROM LCD
*** DATT TEST ***
KEY NO. =
RINGING FREQUENCY =
RINGING LEVEL =
RINGING PATTERN =
500Hz
LOW
LINE-LINE (USA)
R-FRQ R-LEV R-PTN DA ROM LCD