Hitachi HCX5000I - Manual (Page 149)

N IGHT S ERVICE S ELEC S ET 500A U SER G UIDE
2-78 HCXTD840, Issue 1, July 2001
Night Service
About the
NIGHT key Your SelecSet is equipped with a <NIGHT> key. You can
use the <NIGHT> key to activate night service. Night
service directs all after-hours calls to an alternate
destination (night bell, specified station, etc.).
When there
are multiple
attendants If your facility has multiple attendants, one attendant may
be designated as the pilot station for the night service
change. When the pilot station switches to night service,
all other attendants are switched as well. See your system
administrator if you need more information about your
company's night service policy.
Activating
night service To use night service:
1 To activate night service, press <NIGHT>.
2 The lamp associated with the <NIGHT> key lights.
All incoming calls are directed to the predetermined
location.
Deactivating
night service To deactivate night service:
3 Press <NIGHT>.
4 The <NIGHT> key goes dark. Normal call routing
resumes.