Hitachi HCX5000I - Manual (Page 62)

C HAPTER 1: A BOUT Y OUR S ELEC S ET 500A C REATING A M ULTI - PARTY C ONFERENCE
HCXTD840, Issue 1, July 2001 1-51
8 To disconnect the last person added to the conference,
press <CNCL>.
Only the final person added to the conference can be
dropped by pressing <CNCL>. Afterwards, other
parties must disconnect by hanging up.
9 To exit without disconnecting the other parties, press
<JOIN>. The conference is still active, but is now
controlled by the remaining parties.
Dropping out
of a multiparty
conference If you drop out of a multiparty conference, the remaining
parties located at your facility cannot transfer or add other
members to the conference. (Dropping out of a three-party
conference does not affect the remaining parties this way.)