Hitachi HCX5000I - Manual (Page 151)

P AGING S ELEC S ET 500A U SER G UIDE
2-80 HCXTD840, Issue 1, July 2001
Using zone
paging with
auto meet-me,
continued 5 To answer a zone page with auto meet-me, the user
dials the zone paging answer code.
6 The user is connected to the paging party
immediately.
Using zone
paging with
park To use zone paging with park:
1 Press the <ZPG/P> (zone paging with park) key or
dial the zone paging with park access code while
connected to the caller.
2 Dial the proper zone number.
3 Dial a parked call identifier (PCI). When the PCI is
dialed, you can do one of two things:
- Press <START> to complete the park, OR
- Press <CONF> to create a three-way conference
when the paged party responds.
Note: A PCI is a number used to identify the parked
call. Contact your system administrator for a list
of the PCIs available in your system, or, use your
own station number or the station number of the
paged party as a PCI. Parked call identifiers
(PCIs) are sometimes referred to as beeper
identification numbers (BIDs).
Answering a
zone page To answer a zone page with park, the user dials the call
park retrieve access code, plus the parked call identifier
(PCI) used to park the call and is instantly connected to the
parked call.