Hitachi HCX5000I - Manual (Page 166)

C HAPTER 2: A DDITIONAL O PERATIONS
P ROGRAMMING AN A UTODIAL N UMBER
HCXTD840, Issue 1, July 2001 2-95
Programming an Autodial Number
Procedure To program a key with an autodial number or feature:
1 Press <START>.
2 Dial the station speed calling registration code
(usually #7).
3 Press the key that you want to program.
4 Dial the desired station or outside number. Include the
trunk access code (usually 9) if programming an
outside number (Autodial keys can be used to store
account codes and dial access codes, too.)
5 You receive confirmation tone (three short beeps)
when the number is programmed.
Programming
emergency
numbers If you program an emergency number into an autodial key,
make sure the key is programmed correctly by making a
test call. When the called party answers, briefly explain
the reason for the call before hanging up.
Canceling an
autodial
number To cancel an autodial number:
1 Press <START>.
2 Dial the station speed calling cancellation code
(usually ##7).
3 Press the desired key.
4 You receive confirmation tone (three short beeps)
when the number is canceled.