Hitachi HCX5000I - Manual (Page 63)

M ESSAGING S ELEC S ET 500A U SER G UIDE
1-52 HCXTD840, Issue 1, July 2001
Messaging
About
messaging You can use two keys to control messaging as follows:
Turning on
MW lamps
without calling
the station To turn on a message waiting lamp without calling the
station, follow these steps:
1 Press <START>. An idle CAP is selected.
2 Press the <CLME> key.
3 Dial the desired station number.
The display confirms that the lamp is on and you hear
confirmation tone (three short beeps).
Use this key... To do this...
<CLME> control the message waiting lamps
on phones in your facility
<MSG> retrieve multiple message types