Hitachi HCX5000I - Manual (Page 167)

C ANCELING A F EATURE S ELEC S ET 500A U SER G UIDE
2-96 HCXTD840, Issue 1, July 2001
Programming a Feature
Procedure To program a feature, follow these steps:
1 Press <START>.
2 Dial the station speed calling registration code
(usually #7).
3 Press the key that you want to program.
4 Dial the desired feature access code. You receive
confirmation tone (three short beeps) when the feature
is programmed.
Canceling a Feature
Procedure To cancel a feature, follow these steps:
1 Press <START>.
2 Dial the station speed calling cancellation code
(usually ##7).
3 Press the desired key. You receive confirmation tone
(three short beeps) when the feature is canceled.