Hitachi HCX5000I - Manual (Page 32)

C HAPTER 1: A BOUT Y OUR S ELEC S ET 500A S UGGESTED P ROGRAMMABLE K EYS
HCXTD840, Issue 1, July 2001 1-21
Suggested Programmable Keys
About
suggested
programmable
keys Suggested programmable keys should be assigned to
features that are important or frequently performed
attendant operations. Your system administrator assigns all
of these keys at the Customer Maintenance/Administration
Terminal (CMAT).
Table 1-2 Suggested programmable keys
Key Name Purpose
<CLME> Press <CLME> to send a callme message for and turn on
the message waiting lamp of a called station.
<DISC> Disconnects an active call or operation and immediately
lets you dial another number (without first pressing
<START>).
<LTA/VER> The lamp associated with the long trunk
alarm/verification key flashes when a trunk has been
connected for an unusually long time. You also can press
<LTA/VER> to check a specific trunk.
<OVR>
(override) Press <OVR> to break into a busy station or a busy
trunk. All parties hear breakin tone and a three-way
conference is established. Also breaks into a station with
do-not-disturb activated. This button can be used for the
switchhook flash to a trunk feature to access central
office trunks and related services.
<SFPK> Use the <SFPK> soft park key to place up to ten calls on
hold, using a single key. Calls held at this key are
answered in first in/first out order (FIFO) and do not
occupy a call appearance (CAP) key.