Evaluation and registration, Support and contact information – HP zl User Manual
Page 12
hp toptools for openview nnm
user guide
Page 12
Version 5.6
1.3.9 Evaluation and Registration
The HP Toptools Enterprise Products CD provides a 60-day, full featured evaluation of each HP Toptools Enterprise
Product that expires unless a free license key is obtained by registration. To enable evaluation, follow the installation
instructions as described below.
Registration: To obtain a free license key for HP Toptools for OpenView NNM, go to the HP Toptools website
(
/entsols
) and click on “registration key”.
Fill in the registration form. Be sure to enter a valid email address as this is where your license file will be sent.
For NNM-NT/Windows 2000 you must provide the IP address of the NNM server (remote console support
is included).
•
• For NNM-UX or NNM-Solaris systems you must provide the IP address of the toptools server.
You will need to register to receive your key even if you obtain your CD through an HP-authorized reseller. When
you register to receive your license key, you will be emailed a new license.dat file.
License Installation:
• For NNM-NT/WINDOWS 2000 - copy the license file to <drive>:\<NNM-NT/WINDOWS 2000 home
directory>\bin\license.dat on the NNM-NT/WINDOWS 2000 system.
• For NNM-UX or NNM-Solaris - copy the license file to <drive>:\TTBridge on the toptools server system.
Activation:
Activate and verify the new license by stopping and then restarting NNM. You should be able to access toptools
features for HP devices.
1.3.10
Support and Contact information
Both pre- and post-sales support for HP Toptools for OpenView NNM is provided free-of-charge and may be
obtained from the HP Customer Care Centers:
HP Toptools web site
for updates and information on and future releases.
Training modules describing toptools as well as bridge installation and operation are provided on the toptools web
).