HP zl - Manual (Page 19)

hp toptools for openview nnm user guide
2.4 Verifying a Successful Installation
There are two simple ways of verifying that the installation of this side of the bridge was successful. First,
after the system has rebooted, a new process should be listed in the task manager: HPTTsrvbrg.exe as shown below:
Figure 2-5. The Toptools Server Bridge component uses a background process called "HPTTSrvbrg.exe".
Second, this process should be listed as one of the toptools services managed by the RVIEWSCM.EXE manager, a
toptools server process called the Service Control Manager. You can verify this by launching the standalone version
of toptools from the toptools server. (As indicated by an icon on the workspace of the system running the toptools
server, or by launching IE with the URL
http://<Toptools _Server_IP address>/hptt.) From the main screen shown
by the browser, select Settings->Toptools Services and verify the status of the Toptools Server Bridge as shown in
Figure 2-6.
Figure 2-6. The Toptools Services window displays the status of the Toptools Server Bridge.
The Toptools Server Bridge background task should be “Active” and the current activity should be “Bridge running
normally”.
Page 19