HP zl - Manual (Page 61)

hp toptools for openview nnm user guide
Figure 5-29. The Toptools Device View action brings up a realistic representation of the hub to permit
management.
The degree of management control available is dependent on the capabilities of the particular HP hub, bridge, or
switch that is selected.
Figure 5-30. Webagent pages for an HP Procurve Switch provide extensive configuration control and status
monitoring.
Update Firmware (Figure 5-31) is supported by selected models. Some older models require an HP Toptools 5.6
for OpenView NNM-NT/WINDOWS 2000 single system installation.
Page 61