FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 113)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 113
Using Image Position controls
Use the Image Position controls to adjust the position of the overall print area to be
precisely centered on a card.
Step Procedure
1 Click on the Vertical and Horizontal adjustment arrows to adjust the Image
Position values.

When adjusting these values, keep in mind that cards always remain in the
same position while moving through the Printer, regardless of image
orientation.

To illustrate this, the card illustration shown in the Image Position box will flip
and rotate according to the Portrait, Landscape or Rotate 180 Degrees
selection.

The outline around the illustration will always remain in the same Landscape
orientation.