FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 18)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 18
Technical Specifications (continued)
Term Description
Print Ribbon
Options

Full Color with resin black, YMCKO*, 250 prints

Full Color with two resin black panels, YMCKOK*, 250 prints

Full Color with resin black, no overlay panel, YMCKK*, 250 prints,
must be used with overlaminate

Dye-Sublimation black, BO*, 500 prints

Resin black, green, blue, red, white, silver, gold, scratch-off, 1000
prints
*Indicates the ribbon type and the number of ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay,
B=Dye-Sublimation Black
Print Area CR-80 edge to edge (3.37
”
L x 2.11
”
W / 85.5mmL x 53.5mmW)
Supply Voltage 100 to 240 V ac.
Supply
Frequency 50 Hz/60 Hz.
Software Drivers Windows 95/ 98/ ME/ NT/ 2000/XP.
System
Requirements IBM-PC or compatible. Windows 95/ 98/ ME/ NT/ 2000/XP. Pentium
™
class 133 MHz computer with 32 MB of RAM or higher, 200 MB free
hard disk space or higher and ECP parallel port with DMA access.
Warranty Printer - One year; optional Extended Warranty Program (U.S. only)
Printhead - One year, unlimited pass with UltraCard cards
Weight 40 lbs. (18.2kg).
Kits, Adapters
and Cable

16MB RAM Upgrade Kit

Printer Cleaning Kit

Ethernet Interface Adapter (Windows only; required for stand-alone
networking of Printers)

USB-to-Parallel Interface Cable (Windows 98/ME/2000/XP only)