FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 156)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 156
Using SmartShield Area dropdown menu
Use the SmartShield Area options, which apply only if using the Printer's optional
SmartGuard Security Feature and the SmartShield option is enabled.
Step Procedure
1 Select the Apply SmartShield option to print the custom SmartShield Security
Image if using the Printer's optional SmartGuard Security Feature and the
SmartShield option is enabled. (Note: Use the Front and Back options at the
top of this tab to designate the side or sides of the card to print the SmartShield
image.)
OR
Select No SmartShield if not using the SmartShield option or if not printing the
SmartShield image even if it is encoded on the SmartGuard Access Card.
(Note #1: This is a convenient way of turning the SmartShield Security Feature
ON or OFF.)
(Note #2: It is not possible to apply an overlay and a SmartShield image to the
same side of a card.