FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 59)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 59
Resolving the Skipping Ribbon Panel issues
Symptom: The Printer is using more than one set of ribbon panels to print one side of a
card.
Step Procedure
1 Calibrate the Ribbon Sensor.
a. Reset the Printer to clear any Error Messages by removing Power and
reapplying.
b. Open the Printer Control Panel from the Computer.

If using Windows 95/98/ME, right click on the Pro-LX Card Printer
Icon and select Properties.

If using Windows NT 4.0, right click on the Pro-LX Card Printer and
select Document Defaults.

If using Windows 2000/XP, right click on the Pro-LX Card Printer and
select Printing Preferences. Click on the Calibrate tab.
c. Click on the Sensors button.
d. Remove the ribbon and close the top cover.
e. Click on the Send button for a Ribbon Sensor calibration.
Verify that the Printer beeps twice and the LCD displays Sensor Calibrate.
Continued on the next page