Using the overlay / print area tab – FARGO electronic Pro-LX Laminating Card Printer/Encoder User Manual
Page 139
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
139
Using the Overlay / Print Area tab
Use this option to control how the overlay (O) panel and/or the print area will appear on a
card. (Note: This option is helpful if, for Note, to omit or block out the overlay or printing
around a card's smart chip or Magnetic Stripe. By default, this option is set to print and
overlay the entire card.)
Continued on the next page
Advertising