FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 227)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 227
PVC laminate, 29
Q
Queue, 216
R
RAM (Random Access Memory), 216
Rasterize, 216
Rasterize Shield, 39
Reading Key Data, 39
Ready LED, 182
Ready LED Light, 22
Ready mode, 42
Reboot, 216
Reflective Sensor, 196
Registration, 216
Reject Hopper, 48, 69
Rejection Card Hopper, 23, 128
Release Tab, 190
removable memory module (SIMM), 196
replace Sensor, 55
replace the Printhead, 73
reset operating mode, 90
Reset Printer, 51
Resident Font, 216
Resin, 216
resin black (K) panel, 160, 161, 171
Resin Black Panel, 25
Resin Dither, 174, 176
Resin Heat slide, 157
Resin Heat sliders, 157
resin printing problems, 81
Resin Thermal Transfer, 19
Resolution, 217
Resolving data for Magnetic Stripe, 72
RESUME=Duplicate, 42
RESUME=Reprint, 42
RFI (Radio Frequency Interference), 217
RGB (Red/Green/Blue), 217
Ribbon, 217
Ribbon Breaking issues, 64, 65, 66
Ribbon cable, 217
Ribbon Clutch, 58, 61
ribbon ID core, 63
Ribbon ID Sensor, 63
Ribbon Jam Error, 64
Ribbon Jam/Out, 39
Ribbon Low Error Message, 63
Ribbon Sensor, 59, 61, 64
Ribbon Sensor calibration, 90
Ribbon Sensor Calibration, 64, 91
Ribbon tension, 78
Ribbon type, 173
Ribbon Type, 174
Ribbon Type setting, 62
ribbon wrinkle problems, 77, 78
RibbonTraq, 217
RMA number, 217
Roller, 217
Roller Up/Down Error, 49
Roller-dn Failed, 41
Rollers appear dirty, 187
Roller-up Failed, 41
Rotate Front 180 Degrees option, 145, 166
RS-232, 217
RUNNING SELF TEST #12, 63
S
safety issues, 4, 98
Safety Standards, 16
Saturation, 217
saturation, resin text / bar codes, 157
Scratch-Off Resin, 26
Selecting Orientation - Landscape under Card tab, 148
Selecting Orientation
– Portfolio under Card tab, 150
Selecting the Visual Security Solutions, 151, 152, 153
Selecting the Visual Security Solutions dropdown menu,
149
Self-test, 87, 218
Send Track Information, 72
Sending data to Track 1, 132
Sensor, 218
Sensor Calibrate, 39, 41, 59
Sensor Location and Voltages table, 196
Sensor Testing, 196
Sensors button, 64, 117
Serial interface, 218
Settings button, 65, 84
Settings dialog box, 99
settings optimized at factory, 99
Shade Self Test, 92
Shift Data Left checkbox, 129
Shift Data Left option, 129
SIMM, 218
SIMM (080016), 196
Simplex, 218
Skipping Ribbon Panel issues, 59
Slide Lock, 47
Slot Sensor, 196
Smart Card, 218
Smart Card Error, 40
Smart Card Good, 40
Smart Encoding, 40
SmartGuard, 218
SmartGuard Access Card, 156
SmartShield Area dropdown menu, 156
SmartShield
™, 218
Software, 218
Software Driver, 16
special precautions, 4, 98
Spooler, 218
Spooling, 219
SS (Start Sentinel), 219
Stacker, 219
Standard Resin Black (K), 26
Standard Self-test (YMC), 91
Start Sentinel (SS), 131
Stepper motor, 219
streak on card, 186
String, 219
Supply Frequency, 18