FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 64)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 64
Resolving the Ribbon Breaking issues
Symptom: The Ribbon breaks when printing or a Ribbon Jam Error is displayed on the LCD
Step Procedure
1 Calibrate the Ribbon Sensor.
a. Reset the Printer to clear any Error Messages by removing Power and
reapplying.
b. From the Computer, open the Printer control panel.

If using Windows 95/98/ME, right click on the Pro-LX Card Printer
Icon and select Properties.

If using Windows NT 4.0, right click on the Pro-LX Card Printer and
select Document Defaults.

If using Windows 2000/XP, right click on the Pro-LX Card Printer and
select Printing Preferences.
c. Click the Calibrate tab.
d. Click on the Sensors button.
e. Remove the Ribbon and close the top cover.
f. Click on the Send button for a Ribbon Sensor Calibration.
Continued on the next page