FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 22)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 22
Printer Components: Top Cover to Power Port (continued)
Component Description
Ready LED
Light When ON, this light indicates the Printer is ready for operation. When
OFF, this light indicates the Printer is either OFF or paused and will not
operate.
If this light is flashing, a Printer error has occurred. (Note: Refer to the
Printer's LCD display for the specific type of error that occurred. See the
Interpreting LCD Messages for a complete description of all possible LCD
error prompts.
On/Cancel
Button The On/Cancel button turns the Printer power ON and OFF. It also
serves to cancel the current print job and reset the Printer for the next
print job if an unrecoverable print error has occurred.
If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON. (Note:
With the Top Cover(s) open, this button can also be used to manually
rotate the feed Rollers forward. This is helpful when cleaning the Printer
or if clearing jammed media.)
Pause/
Resume
Button The Pause/Resume button allows the User to pause the Printer at any
time during operation. Note, however, that the Printer will always finish its
current task before pausing.
If the Pause/Resume button is pressed in the middle of printing the
magenta ribbon panel, the Printer will pause only after the entire magenta
panel has printed. (Note: The Ready LED Light will turn OFF when the
Printer is paused and ON again when operation is resumed. With the Top
Cover(s) open, this button can also be used to manually rotate the feed
Rollers backward. This is helpful when cleaning the Printer or if clearing
jammed media.)
Access Card
Slot This is the slot in which a SmartGuard Access Card is inserted when
using the Printer's included SmartGuard Security Feature. (Note: This
unique option prevents the Printer from operating unless a custom
access card is inserted. It also allows the User to print custom
SmartShield Security Images which glow under ultraviolet light.)
Card Input
Hopper Load blank cards into this Hopper.