Fostex VF80EX - Manual (Page 101)

101
Advanced Operations (VF80EX)
Use the [JOG] dial (or the [CURSOR] keys) to select the
desired step and press the [ENTER/YES] key.
The program set to the selected step is loaded and the
recorder is stopped at the beginning of the program (ABS
0), while the display shows the Normal screen.
In the screen examples below, program 4 (P04) set to
step 4 (C04) is selected.
2
Instead of pressing the [ENTER/YES] key in the procedure
above, you may press the [SETUP/F1] key while holding down
the [SHIFT] key.
As described above, by selecting a program while the
chain play mode is set to any option but
“Off” , you can
start chain play from the desired program.
Editing the chain play list
You can replace a program in the chain play list with
another program, delete a program from the list, or
add a new program to the list.
Deleting (or replacing) a program in the chain play list
You can delete a desired program from the chain play
list or replace a program in the list with another
program by following the procedure below.
While the recorder is stopped, press the [SETUP] key
to enter the setup mode.
The screen for selecting a menu item in the setup mode
appears.
1
Use the [JOG] dial (or the [CURSOR] keys) to select
“Chain Play List”, and press the
[ENTER/YES] key.
The display changes to shows the “Chain Play List” screen
as below.
2
Use the [JOG] dial (or the [CURSOR] keys) to select the
step you want to edit, and press the [ENTER/YES] key.
The program number set to the selected step starts
flashing.
In the example below,
“P03” which is set to step 3 (C03)
is flashing.
3
Use the [JOG] dial to select “DEL” (or a desired program)
and press the [ENTER/YES] key. 4