Fostex VF80EX - Manual (Page 108)

108
Save/Load of Song data (VF80EX)
Digital equipment
Flashing
OFF ON MIDI OUTPUT INPUT OUTPUT INPUT POWER PHANTOM S/P DIF / DATA
VF80EX
S/P DIF DATA OUTPUT
Saving data using the S/PDIF digital signal
You can save data using the S/PDIF digital signal via the [S/P DIF DATA OUTPUT] (coaxial) jack.
• Use an external digital recorder that supports 44.1 kHz sampling frequency (the same as the VF80EX),
Connecting to an external digital recorder
Connect the [S/P DIF DATA OUTPUT] jack to the digital
input jack of the external digital recorder (DAT, etc.).
<Note>
Do not do anything, such as unplug the connecting
cable, that interrupts the digital signal until the saving
operation is completed. Otherwise, the unit may
generates a noise which damages an external recorder.
• If your digital recorder only provide the optical digital
input jack and does not provide the coaxial jack, use
the optional COP-1/96k (optical/coaxial converter).
• Do not connect digital signals for both directions
between the VF80EX and the external recorder (i.e.
the digital output of the VF80EX to the digital input
of the external recorder and the digital output of the
external recorder to the digital input of the VF80EX),
which may form a digital loop and cause feedback.
Setting the external recorder
Set the sampling frequency to 44.1 kHz (the same as
the VF80EX).
Set the input source to "digital input" to accept the
signal from the VF80EX.
Some machine also needs to select the clock reference
to
"external" when setting the input source to "digital
input" . See the operation manual of the machine for
the detailed information.
<Note>
If you cannot hear the input signal or you hear
digital noise when monitoring the source signal of
the external digital recorder, check the connections,
cables and settings of both the VF80EX and the
external recorder.
• See the operation manual of the external recorder for the
detailed information.
Saving data
You can save data via the "Save PGM" menu in the
setup mode.
<Details about "Save PGM" menu>
• Output signal options: S/PDIF and IDE (CD-R/RW drive)
• Program options:
P01 to P99 (an individual Program)
• Track options:
* When using S/PDIF:
Tracks 1-8, Tracks 1-16, Tracks 1-24, Tracks 9-16, Tracks 9-24
or Tracks 17-24.
* When using IDE (CD-R/RW drive):
All tracks (1-24) is selected automatically. (You can select tracks
individually when saving by the WAV file format).
Press the [SETUP] key to enter the setup mode.
The display shows the screen for selecting the setup
menu.
Use the [JOG] dial to select "Save PGM" and press
the [ENTER/YES] key.
The display shows the screen for selecting the device
to which the data is saved. "
IDE " flashes.
• "IDE" should be selected when saving or loading data via
CD-RW/CD-R.
Use the [JOG] dial or [CURSOR] keys to select
"SPDIF" and press the [ENTER/YES] key.
The display shows the screen for selecting the program
to be saved.
The program number currently selected flashes, while
the data size of the program is shown.
While a program number is flashing, you can select
the desired program to be saved.
1
2
2
1
3