Fostex VF80EX - Manual (Page 98)

98
Advanced Operations (VF80EX)
Making the chain play list
Before executing chain play, you must make the
chain play list by selecting the desired (or all) pro-
grams in the desired order. You can enter up to 99
programs to the chain play list.
The following procedure examples show how to en-
ter all programs on the VF80EX current drive and
how to select desired five programs to the list, as-
suming that 10 programs are recorded on the
VF80EX current drive.
While the VF80EX is stopped, press the [SETUP] key.
The VF80EX enters the setup mode and the display
changes to show the "
Select Menu " screen for selecting
a setup menu item.
By default, the "
Signature Set " flashes as shown in the
figure below.
1
2 Use the [JOG] dial (or the [CURSOR ] key) to select
"Chain Play List" which is the 27th menu item (R27) in
the setup menu, and then press the [ENTER/YES] key.
The display changes to show the " Chain Play List "
screen, in which " C01:END " is highlighted by default.
" C01 " shows the step number, while " END " shows no
program is entered to the chain play list.
Press the [ENTER/YES] key again.
"END" starts flashing and you can now enter a desired
program to step 01.
3
By rotating the [JOG] dial while " END " is flashing, you
can select a desired option from among the programs
on the drive ("
P01 " through " P10 "), as well as " ALL ",
" INS " and " DEL ". See the table below for details about
each option.
END
The current and succeeding steps in the chain
play list are all deleted. (See "Deleting all programs
from the chain play list" described later for de-
tails.)
ALL
All programs on the current drive are entered to
the chain play list. Note that you can select "ALL"
to step 1 (C01) only. There is no "ALL" option on
other steps. (See "Making the chain play list by
selecting all the programs" described later for
details.)
INS
A desired program can be added (inserted) to the
current step. (See "Inserting a program to the chain
play list" described later for details.)
DEL
The program on the current step is deleted. (See
"Deleting a program from the chain play list" de-
scribed later for details.)
P01
~
Pnn
A desired program is entered to the current step.
If another program is already entered, the new
program overwrites it. You can select any of the
programs on the current drive. (See "Making the
chain play list by selecting desired programs" de-
scribed later for details.)
Making the chain play list by selecting all the programs
The following procedure example shows how to en-
ter all the programs (P01 through P10) on the cur-
rent drive to the chain play list.
While "END" is flashing, rotate the [JOG] dial to se-
lect "ALL", and press the [ENTER/YES] key.
By rotating the [JOG] dial to the left, you can find " ALL "
easily.
By pressing the
[ENTER/YES] key after selecting " ALL ",
all programs on the current drive are entered to the
chain play list, as shown in the screen example below.
1
By rotating the [JOG] dial (or using the [CURSOR / ]
keys), you can scroll through the list to check the chain
play list. In the last line on the list, "
C11: END " is shown,
which shows that no more program is entered after
step 11.