Fostex VF80EX - Manual (Page 132)

132
Save/Load of Song data (VF80EX)
<Hint>
To play back a desired loaded track on the current drive, carry out the following operation depending
on the load type.
• To play back a track loaded with the type set to "One":
1. Select the appropriate program to which the track to be played back is loaded by following the
procedure below. (See "
Selecting a program " on page 62 for details about how to select a
program.)
1-1. Press the [TRACK EDIT/PGM] key while holding down the [SHIFT] key.
1-2. Use the [JOG] dial (or the [CURSOR / ] keys) to highlight the appropriate program.
1-3. Press the [ENTER/YES] key.
2. Press the [PLAY] key to start playback of the track.
• To play back tracks loaded with the type set to "Select" or "All":
1. Select the destination program by following the same procedure as step 1 above.
2. Select a desired track in the program by using the [LOCATE | ] or [LOCATE |] key while the
recorder is stopped or during playback.
Because all the tracks loaded take part in the same program, you have to select a track within
the program.
The VF80EX automatically set a mark at the beginning of each track loaded with the type set to
"
Select " or " All ", so pressing [LOCATE | ] or [LOCATE |] key locates to the beginning of the
previous or next track, as with a typical CD player on the market (see " Mark function " on page
32 for details).
3. Press the [PLAY] key to start playback of the track.
To check marks, press the [SCENE SEQ./MAP] key while holding down the [SHIFT] key while the recorder
is stopped. The display shows the mark map, allowing you to check the mark positions (in the screen
example below, the time base is set to "
Bar/Beat/Clk ").