Fostex VF80EX - Manual (Page 105)

105
Advanced Operations (VF80EX)
• Varipitch playback
You can use the varipitch playback function which
allows to alter the playback speed within +/- 6.0 %
range in 0.1 % increments/decrements.
* For details about the varipitch function, see
page 58 in the owner’s manual.
• Effect, EQ and pan controls
You can use the effect, EQ and pan controls for
tailoring the playback sound.
* For details about the effect function, see pages
37 and 45 in the owner’s manual.
* For details about the EQ function, see pages 37
and 42 in the owner’s manual.
* For details about the pan control, see pages 37
and 41 in the owner’s manual.
• Audio CD eject
In the audio CD playback mode and when the
VF80EX is not accessing the disc, you can eject a
disc in the CD-R/RW drive by pressing the [EXIT/
NO] key while holding down the [SHIFT] key (or
pressing the eject key on the CD-R/RW drive).
• Display time mode selection
By pressing the [TIME BASE SEL] key, you can select
the time mode on the display from among
“ABS” ,
“Track” and “MTC”.
Note that, in the internal HDD playback mode, the
time mode can be selected from among
“ABS” ,
“Bar/Beat” and “MTC” .
* See the below for details about the time display.
• Display in the audio CD playback mode
When switching to the audio CD playback mode, the display looks like the example below.
Each press of the [TIME BASE SEL] key switches the display time mode among “ABS”, “Track” and
“MTC”, and the associated time information is shown. See the table below for details about each
time mode.
In the audio CD playback mode, only the level meters for
tracks 1, 2 and L/R master are effective. The playback level
can be controlled using the faders for tracks 1, 2 and
[MASTER]. This section shows the current track number and name. In this example,
“CD01” shows the current track number is “01”. On the right of the track
number, the track name is shown when playing back a CD TEXT disc (an
audio CD containing text information) which has track title information. If
the name is long and exceeds the display area, it is scrolled in the next
row.
When playing back a normal audio CD (which does not contain text
information) available on the market or burned using the VF80, “No Title”
is shown, as this example.
If the current audio CD has more than one track, pressing [LOCATE ] or
[LOCATE ] key skips a track and locates to the beginning of an appropriate
track, while “Locate: MARK**” is shown on the display.
ABS
TRACK
MTC
Disc elapsed time is shown. The time starts from the beginning of a disc. The loop start and end points refers to disc
elapsed time.
Track elapsed time is shown. Track time starts from the beginning of each track. Naturally, at the point each track starts
playback, the display shows “00m00s”.
MTC (MIDI Time Code) is shown. It has an offset of 59 minutes 57 seconds to “ABS 0” (the same offset as the internal HDD
playback mode).