99 advanced operations (vf80ex) – Fostex VF80EX User Manual

Page 99

Advertising

Advanced Operations (VF80EX)

Press the [EXIT/NO] key.

The chain play list is made and the "

Chain Play List

screen is dismissed. The display returns to the "

Select

Menu

" screen, where the current option of the "

Chain

Play

" menu item flashes (by default, "

Off

" flashes) and

you can now set the chain play mode.

For details about how to set the chain play mode, see
"

Setting the chain play mode

" on page xx.

<Note>

If a program which participates in the chain play list is
deleted from the drive (see page 62 "

Deleting a program

in the owner's manual), the whole play list is cleared
(it returns to show "

C01: END

").

For example, if you are going to delete program 5 while
programs 1 through 10 are entered to the chain play
list, the warning message, "

[WARNING] Play List Deleted

is shown on the display. Deleting program 11, for ex-
ample, which does not participate the chain play list
does not affect the chain play list.

Making the chain play list by selecting desired programs

The following procedure example shows how to en-
ter the five desired programs (from among 10 pro-
grams on the current drive) to steps 1 through 5 in
the chain play list, as below.

: C01 -> program 5 (P05)
: C02 -> program 3 (P03)
: C03 -> program 1 (P01)
: C04 -> program 2 (P02)
: C05 -> program 4 (P04)

While "END" is flashing on the screen, rotate the [JOG]
dial to select "P05" and press the [ENTER/YES] key.

You can select the desired program by rotating the

[JOG]

dial to the right.

When selecting the program, the first nine characters
of the program name is also shown (in the example
below, the name is "

#0005

").

After selecting "

P05

" and pressing the

[ENTER/YES]

key,

program 5 (P05) is set to step 1 (C01) of the chain
play list and the screen changes as shown below.

Use the [JOG] dial (or the [CURSOR ] key) to high-
light "C02: END" and press the [ENTER/YES] key.

As with procedure step 1) above, "

END

" of "

C02: END

starts flashing.

While "END" is flashing on the screen, rotate the [JOG]
dial to select "P03" and press the [ENTER/YES] key.

As with procedure step 1) above, program 3 (P03) is
set to step 2 (C02) of the chain play list and the screen
changes as shown below.

Set programs to steps 3 through 5 (C03 through C05)
of the chain play list with the same manner as above.

After completing setting all the desired programs to
the chain play list, press the [EXIT/NO] key.