51 mixer functions (vf80ex) – Fostex VF80EX User Manual
Page 51
51
Mixer Functions (VF80EX)
Chorus effect parameters (parameter type: CHORUS)
For effect type
35
of the preceding "Effect type" table, the following five parameters can be adjusted.
1.
Eff Level
Adjust the effect return level:
0~99
2.
Depth
Adjust the chorus depth. Range:
0--99
3.
Double Time
Adjust the time difference of the doubling effect. Range:
0--99
4.
Double Lvl
Adjust the volume of the doubling effect. Range:
0--99
5.
Filter
Adjust the tone of the delay sound. Range:
L9~L1, OFF, H1~H9
*
L1~L9
= LPF (larger numbers will lower the cutoff frequency)
*
H1~H9
= HPF (larger numbers will raise the cutoff frequency)
Flanger effect parameters (parameter type: FLANGE)
For effect type
36
of the preceding "Effect type" table, the following five parameters can be adjusted.
1.
Eff Level
Adjust the effect return level:
0~99
2.
Rate
Adjust the speed of modulation. Range:
0.01--2.00 Hz
3.
Depth
Adjust the depth of modulation. Range:
0--99
4.
Mod Delay
Adjust the modulation delay. Range:
0--200
5.
Feedback
Adjust the number of modulation repeats. Range:
0--99
Delay pitch effect parameters (parameter type: DELAY PITCH)
For effect type
38
of the preceding "Effect type" table, the following five parameters can be adjusted.
1.
Eff Level
Adjust the effect return level:
0~99
2.
Pitct
Adjust the amount of pitch shift. Range:
-24--0--+24
*
+/-12
is one octave.
+/-24
is two octaves.
3.
Adjust
Make fine adjustments to the amount of pitch shift. Range:
-50--0--+50
*
+50
is a semitone sharp.
-50
is a semitone flat.
4.
Delay Time
Adjust the delay time until the pitch-shifted sound is heard. Range:
0--500 ms
5.
Feedback
Adjust the number of delay repeats. Range:
0--99
Mono pitch effect parameters (parameter type: MONO PITCH)
For effect type
37
of the preceding "Effect type" table, the following four parameters can be adjusted.
1.
Eff Level
Adjust the effect return level:
0~99
2.
Pitch
Adjust the amount of pitch shift. Range:
-24--0--+24
*
+/-12
is one octave.
+/-24
is two octaves.
3.
Adjust
Make fine adjustments to the amount of pitch shift. Range:
-50--0--+50
*
+50
is a semitone sharp.
-50
is a semitone flat.
4.
Mode
Select the processing method. Range:
1--3