Fostex VF80EX - Manual (Page 144)

144
SETUP mode (VF80EX)
Use the [JOG] dial to select "On" or "Off", and press
the [ENTER/YES] key.
The selected option is set.
Fader Fix Mode Setting [“Fader Fix”]
By setting the "Fader Fix" menu item to "On", you can disable the operation of the track and master faders on
the panel.
On the Select Menu screen of the SETUP mode, se-
lect "Fader Fix" and press the [ENTER/YES] key.
The current setting starts flashing (by default, "Off"
is selected).
On
Press the [EXIT/NO] key (or the [STOP] key) repeat-
edly until the VF80EX exits the SETUP mode.
• Default: Off
• Available Options: On or Off
* This setting is common to all programs on the same disc.
* You cannot save the setting as a part of the song data.
* The setting remains effective even after you power off and then
on.
flashing
<Caution>
The fader fix mode is effective only when the "Fader
Recall" menu item (described below) is set to "On".
1
2
3
The Drive Format Information [“Drive Information”]
On the Select Menu screen of the SETUP mode, se-
lect "Drive Information" and press the [ENTER/YES]
key.
The display changes to show the "Drive Information"
screen, in which you can see the current drive infor-
mation.
indicates that invisible information exists under the
screen.
You can scroll the list to see the item you want to
check by rotating the [JOG] dial.
Press the [EXIT/NO] key (or the [STOP] key) repeat-
edly until the VF80EX exits the SETUP mode.
From the "Drive Information" menu item, you can check the format information of the current drive.
If you have any trouble with your VF80EX and contact your nearest Fostex service station, this information is
very important and helpful for us in giving quick service.
1. Manufacture/Model of the currently installed hard
disk
2. Format method
3. Format type
4. Number of tracks available for recording/playback
5. Number of bits at formatting
6. Sampling frequency at formatting
7. Number of programs on the disk
8. Number of free blocks on the disk
9. Largest number of audio files/events among
programs and the associated program number.
10. Total capacity of the drive
11. Remaining space of the drive
12. Software version at formatting
1
2
3
You can see the following drive information.
Off (default)
The operation of controlling the track and
master faders reflects the sound level.
In all modes, the operation of controlling
the track and master faders is ignored and
does not change the sound level.