Garland 200 - Manual (Page 45)

Part # MCOSM06 Rev 1 (11/03/08) Page 45
Disassembly Of The Left Door
1. Once the door has been removed from the oven (refer to
previous instructions), remove the 12 truss head 10 x 1/2
Phillips screws.
2. Remove 2 allen head cop screws from the door handle.
3. Carefully pry off the door panel from the door window
bezel.
4. Remove 2 hex head m.s. 1/4-20x1/2 from the door liner
that attach hold down straps to the door liner.
5. Lift out the door frame.
6. Carefully pry off the door window for the door liner.
7. To remove the door catch remove 2 pan head Phillips
screws.
8. To reassemble – reverse the above procedure.
NOTE: There is a seam on one side of the bezel that is part of
the door window, reinstall working from the opposite side
of that the seam is on and work around the window towards
that seam.
1
7
7
7
6
3
4
5
2 8
NOTICE: DEPENDENT DOOR SHOWN
Disassembly of the Left Door