Garland 200 - Manual (Page 63)

Part # MCOSM06 Rev 1 (11/03/08) Page 63
ADDITIONAL NOTES
• Note the pins and voltages for the 15 pin connector from control to relay board
Pins 1 & 3 is the power (24 volts-AC ± 10%)
Pins 4 & 5 is the heat demand (24 volt DC coil)
Pins 6 & 5 is the oven light (24 volt DC coil)
Pins 8 & 5 is the low fan (24 volt DC coil)
Pins 7 & 5 is the high fan (24 volt DC coil)
Pins 9 & 10 are Door Switch 1 (dry contact)
Pins 9 & 12 are Door Switch 2 (dry contact)
Pins 13 & 14 are cavity probe (1654 ohms at 350 F)
Pins 14 & 15 are Core probe (1000 ohms at room temperature)
Note: pin 11 is tied to pin 14