Metz Mecablitz 54 MZ-3 - Manual (Page 104)

not ready for firing, if the reflector has been swivelled
out of its normal position or if the secondary reflector
of the mecablitz has been switched on!
• 3D TTL flash operation is not possible in the Metz
cordless remote mode!
• 3D TTL mode is only possible with the mecablitz 40
MZ-3(i), 50 MZ-5, 54 MZ-3 and 70 MZ-... flash units!
(Ca): The E-TTL mode cannot be activated.
• The mecablitz must be fitted with the SCA 3102 adap-
ter. The E-TTL mode can only be set on the mecablitz if
it is mounted on a switched-on camera that supports
the E-TTL mode. Data exchange between camera and
SCA adapter must have taken place at least once (sim-
ply tap the camera release lightly without tripping the
shutter).
• The E-TTL mode is not supported if the secondary
reflector of the mecablitz has been switched on!
• The E-TTL mode is switched over to normal TTL mode
when the secondary reflector of the mecablitz is
activated! Problem EOS D30: The mecablitz can no
longer be triggered when in TTL mode; change over to
"Automatic"!
• The E-TTL flash mode is not possible in the Metz cord-
less remote flash mode!
• The E-TTL mode is only possible with the mecablitz
40 MZ-3i, 40 MZ-1i and 54 MZ-3 flash units!
Flash readiness is not achieved on the mecablitz
when in remote flash mode.
• The secondary reflector of the mecablitz has been
switched on; the symbol is indicated on the display.
Remedy: Switch off the secondary reflector.
Flash readiness indicator on the mecablitz is flas-
hing.
• The modelling light function has been activated on the
mecablitz.
Remedy: Deactivate the modelling light function on the
mecablitz.
The ISO film speed cannot be adjusted on the meca-
blitz.
• The mecablitz has been fitted with an SCA 3xx2 adap-
ter and is operated with a camera that transmits the
film speed data to the mecablitz. In this case the ISO
film speed setting is blocked.
The aperture cannot be adjusted on the mecablitz.
• The mecablitz has been fitted with an SCA 3xx2 adap-
ter and is operated with a camera that transmits the
Troubleshooting hints
Cosa fare in caso di anomalie
En caso de problemas
104
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 104