Metz Mecablitz 54 MZ-3 - Manual (Page 28)

4.1 Sub-modes of the automatic flash mode
Different sub-modes can be set when the mecablitz is in
auto flash mode A:
• Auto-remote with address „Ad 1“ (see Chapter Metz
Remote Mode)
• Auto-remote with address „Ad 2“ (see Chapter Metz
Remote Mode)
Setting a sub-mode of the automatic flash mode:
• Depress the Mode button repeatedly until A flashes on
the display.
• Turn the setting disk to set the desired sub-mode.
• Push the setting disk in the direction of the arrow for
storage. The selected sub-mode will be automatically
stored after approx. 5 seconds if the setting disk is not
pressed. After storage, icon A will stop flashing.
28
Automatic flash mode
Modo flash Auto
Funcionamiento Automático
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 28