Metz Mecablitz 54 MZ-3 - Manual (Page 58)

very dark or far behind the moving subject. Best
results are achieved with a low ambient light
level.
Table 5 of the Technical Data specifies the maximum
partial light output levels for N - f(Hz) combinations.
Ensure that a sufficiently slow shutter speed is set on
the camera.
Table 6 of the Technical Data specifies the fastest came-
ra shutter speeds for the N - f(Hz) combinations.
58
Stroboscopic mode
Modo flash stroboscopico
Funcionamiento Estroboscópico
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 58