I-Tech Company CMS 6R4 Series - Manual (Page 104)

10-6
CMS-6R4 Series - User’s Guide
/CP Copy RS232 Port Parameters
Allows quick set-up when several RS232 ports will be configured with similar
parameters. When the /CP command is invoked, the CMS-6R4 will display a
menu that can be used to copy parameters to all or several RS232 ports. For
more information, please refer to Section 5.5.3.2.
Availability: Supervisor Only
Format:
/CP <x> [Enter]
Where:
x Is the number of the port(s) where the copied parameters will
be applied. To apply the command to several ports, enter a
comma between each port number. To apply the command to a
range of ports, enter the numbers for the first and last ports in
the range, separated by a dash character (-). To apply the
command to all plugs allowed by your password, omit the port
number argument.
Response: Displays Copy Parameters Menu.
/D Third Party Disconnect
Invoke the /D command at your resident port to disconnect two other ports.
Note that the /D command cannot disconnect your resident port.
Availability: Supervisor Only
Format:
/D[,Y] <x> [x] [Enter]
Where:
,Y (Optional) suppresses the "Sure?" prompt.
x Is the number or name of the port(s) to be disconnected. To
apply the command to several plugs, enter a space character or
a plus sign (+) between each plug number. To apply the
command to a range of plugs, enter the numbers for the first
and last plugs in the range, separated by a colon character (:).
To apply the command to all plugs allowed by your password,
enter an asterisk character (*).
Response:
Verbose: "Sure (y/n)?", if Y, unit will respond with "Disconnected".
Terse: 5, if Y, unit will respond with 3.
Example: To disconnect Port 2 from Port 3 without the "Sure?" prompt,
access the Command Mode from a third port with Supervisor Level command
capability and type:
/D,Y 2 [Enter] or /D,Y 3 [Enter]