I-Tech Company CMS 6R4 Series - Manual (Page 43)

5-21
Confi guration
Telnet Parameters:
• Service: Enables/Disables Telnet communication with the CMS-6R4
unit. When this item is "Off," users will not be able to contact the unit via
Telnet. (Default = On.)
• Port Number: Selects the TCP/IP port number that will be used for
Telnet connections. The Port Number can be set to any valid number
except 80; this is because 80 is the default port number for the
CMS-6R4's Web Server feature. (Default = 23.)
• Telnet Port Parameters: Provides access to the Telnet Port Parameters
menu, which is discussed in Section 5.5.2.2.
Note:
In the Text Interface, Telnet Port Parameters are defined
via item 12 in the Network Parameters menu. In the Web Browser
Interface, Telnet Port Parameters are defined using the Telnet
Parameters button in the SetUp Menu.
Web Server:
Note: In the Text Interface, Web Server Parameters are defined via
the Network Parameters menu. In the Web Browser Interface, Web
Server Parameters are defined using the Web Server Parameters button
in the Setup Menu.
• Service: Enables/Disables the CMS-6R4’s Web Server. Note that when
the Web Server is disabled, you will not be able to communicate via the
Web Browser Interface. (Default = On.)
• Port Number: Sets the TCP/IP Port Number. The Port Number can be
set to any valid number except 23; this is because 23 is the default port
number that is used for communication with the unit via Telnet.
(Default = 80.)
• Inactivity Timeout: Enables and selects the Timeout Period for the Web
Browser Interface. If enabled, and the Web Browser Interface does not
receive or transmit commands for the specified Timeout Period, the port
will disconnect. (Default = 5 Min.)
MAC Address:
• MAC Address: Displays the unit’s MAC Address. Please note that this
item only displays the assigned MAC Address, and cannot be used to
redefine the address. Note also that the MAC Address is not displayed via
the Web Browser Interface.