I-Tech Company CMS 6R4 Series - Manual (Page 24)

5-2
CMS-6R4 Series - User’s Guide
5.2. Communicating with the CMS-6R4
In order to configure the unit or invoke command functions, you must first
connect to the CMS-6R4 and access command mode. As discussed in
Section 3, the CMS-6R4 offers two separate command interfaces: the Web
Browser Interface, and the Text Interface.
The CMS-6R4 also offers three different methods for accessing command
mode; via network, via external modem, or via local PC. The Web Browser
Interface is only available when the CMS-6R4 is contacted via network, and
the Text Interface is available via network, modem or local PC. The sections
that follow describe the procedure for accessing the Web Browser Interface or
Text Interface.
Note: Configuration functions are only available when you have
logged into the CMS-6R4 command mode using a password that
permits access to the Supervisor Mode.