I-Tech Company CMS 6R4 Series - Manual (Page 66)

6-2
CMS-6R4 Series - User’s Guide
3. Switching Plugs On: Click the "On" radio button next to the desired
plug(s), then click "Apply". To switch all Plugs On, click the "On" radio
button in the "All Plugs" row, then Click "Apply."
4. Switching Plugs Off: Click the "Off" radio button next to the desired
plug(s), and then click "Apply". To switch all Plugs Off, click the "Off"
radio button in the "All Plugs" row, and then Click "Apply."
5. Reboot Cycle: Click the "Boot" radio button next to the desired plug(s),
and then click "Apply". To reboot all Plugs, click the "Boot" button in the
"All Plugs" row, and then Click "Apply."
6. Set All Plugs to Power Up Defaults: To set all outlets to their user-
defined Power-Up Default On/Off status, click the "Default" button in
the "All Circuits" row and then click "Apply." Note that in order for this
command to function, Power Up Default values for each plug must first
be defined as described in Section 5.5.5.
When each switching, default or reboot command is invoked, the CMS-6R4
will display a screen which indicates that a switching operation is in progress,
then return to the Plug Status screen when the command is complete. At that
time, the Status Screen will list the updated On/Off status of each plug.
Figure 6.1: The Status Menu - Web Browser Interface