I-Tech Company CMS 6R4 Series User Manual
Page 112
10-14
CMS-6R4 Series - User’s Guide
/UL
Unlock Port (Invalid Access Lockout)
Manually overrides the CMS-6R4’s Invalid Access Lockout feature. Normally,
when a user-defined number of unsuccessful password attempts are detected
at a given port, the Invalid Access Lockout feature will shut down that port for
a user specified time period in order to prevent further access attempts. When
the /UL command is invoked, the CMS-6R4 will immediately unlock all ports
that are currently in the locked state. For more information on the Invalid
Access Lockout feature, please refer to Section 5.5.2.3.
Availability: Supervisor Only.
Format:
/UL [Enter]
Response: The CMS-6R4 will unlock all CMS-6R4 RS232 Ports.
/V
View Password Directory
Displays a menu which lists all currently defined User Password accounts. The
Password Directory Screen will list the User Name, whether or not a password
has been defined, the Dialback Number, the Status of the Dialback feature, and
whether or not Supervisor Access is enabled for each password/account. For
more information on defining, editing and deleting passwords, please refer to
Sections 5.4 and 5.5.1.1.
Availability: Supervisor Only.
Format:
/V [Enter]
Response: The CMS-6R4 will Display the Password Directory screen.
/W
Display Port Parameters (Who)
Displays configuration information for an individual port, but does not
allow the user to change parameters. For more information, please refer to
Section 7.4. Note that when you have logged into command mode using a
password/account that does not permit access to Supervisor Level commands,
the /W command can only be used to display parameters for your resident port.
Availability: Supervisor / Non-Supervisor
Format:
/W [x] [Enter]
Where
x is the port number or name. If the "x" argument is omitted,
parameters for your resident port will be displayed.
Response: Displays port parameters.
Example: To display parameters for a port named "SERVER", access the
Command Mode from a port and account that permits Supervisor commands,
and type
/W SERVER [Enter].