I-Tech Company CMS 6R4 Series - Manual (Page 109)

10-11
Command Reference Guide
/ON Switch Plug(s) ON
Switches selected outlet(s) On, as described in Section 6.2.2. When a several
plugs are switched On by this command, Boot/Sequence Delay Period will be
applied as described in Section 5.5.5.1.
Note: When this command is executed by a Non-Supervisor, it will
only be applied to the plugs that are allowed by the password entered
at login.
Availability: Supervisor / Non-Supervisor
Format:
/ON[,Y] <n> [Enter]
Where:
,Y (Optional) Suppresses the Command Confirmation Prompt.
n The number or name of the plugs that you intend to switch On.
To apply the command to several plugs, enter a space character
or plus sign (+) between each plug number. To apply the
command to a range of plugs, enter the numbers for the first
and last plugs in the range, separated by a colon character (:).
To apply the command to all plugs allowed by your password,
enter an asterisk character (*).
Response: T
Verbose: The CMS-6R4 will list the plugs that will be switched On, and
then display the "Sure? (y/n)" prompt, if Y is entered in response to the
prompt, the unit will indicate that the command is in process, and then
display the main status screen when complete.
Terse: 5, if Y, the unit will respond with J.
Example: Assuming that your password allows access to Plug 2 and Plug 3,
to switch Plugs 2 and 3 On, invoke following command:
/ON,Y 2+3 [Enter]
/P Set RS232 Port Parameters
Displays a menu that is used to select options and parameters for the RS232
Serial Ports. Note that all functions provided by the /P command are also
available via the Web Browser Interface in the "Serial Parameters" menu.
Section 5.5.3 describes the procedure for defining port parameters.
Availability: Supervisor Only
Format:
/P [x] [Enter]
Where x is the number or name of the port to be configured.
Response: The Port Parameters Menu is displayed.