Sony CG-FX120K User Manual
VAIO Notebook User Guide
My notebook starts, but my system doesn’t start properly
When the internal backup battery is low on power, it may not start your
system properly. The message “Press <F1> to resume, <F2> to setup”
appears at the bottom of the screen. Follow these steps:
Press F2. The BIOS Setup menu appears.
Set the date (month/day/year). Press Enter.
to select System Time, then set the time (hour: minute:
second). Press Enter.
to select Exit, then press
to select Get Default Values. The
message “Load default configuration now?” appears.
Select Yes and press Enter.
Select Exit (Save Changes), and then press Enter. The message “Save
Configuration changes and exit now?” appears.
Select Yes, and then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not found” appears
and Windows does not start
Make sure there is no diskette in the floppy disk drive (non-bootable).
If a non-bootable diskette is in the drive, follow these steps:
Turn off the notebook, and then remove the diskette.
Restart the notebook and confirm that Windows starts properly.
If Windows still does not start, follow the steps below to initialize the BIOS:
Remove any diskette from the floppy disk drive.
Turn off the notebook.
Remove any peripheral devices connected to the notebook.
Turn the notebook back on.
Press the F2 key when the Sony logo appears. The BIOS setup menu
Press the directional arrow keys to select the Exit menu.