State Industries SANDBLASTER SBD85 500 User Manual
Page 3
SBD TANK TYPE HEATERS
SERVICE HANDBOOK
Technical Training Department
Ashland City, TN ©2003
2
Qualifications: Installation or service of this water heater requires ability equivalent to
that of a licensed tradesman in the field involved. Plumbing, air supply, venting, gas
supply and electrical testing skills are required.
Tools Required:
• Phillips head screwdriver
• standard screwdrivers
• a 3/8 and 7/16 inch open end wrench
• set of marked drill bits
• an electrical multimeter tester capable of measuring continuity
• gas pressure gauge or manometer
• water pressure gauge
• thermometer
• 1/2 inch socket with extension for removal of the clean out cover,
• 1 1/16 inch socket with extension for anode removal.
CUSTOM COMMERCIAL STORAGE TANK MODEL NUMBER BREAKDOWN
Model Breakdown
SBD 85 500 P E A CGA D
*Up to 8,000 Feet
S
D
85
500
P
E
A
D
B
Sandblaster/Damper
85
Gallon
500,000
BTUH
Propane
3 Year
Warranty
ASME
Constructed
High
Altitude*
CGA
None=Standard
T=Tall
S=Short
Canadian
Product
(if applicable)