Samsung S3C2440A User Manual
Page 396
LCD CONTROLLER
S3C2440A RISC MICROPROCESSOR
15-28
LCD Control 2 Register
Register Address R/W
Description
Reset
Value
LCDCON2
0X4D000004
R/W
LCD control 2 register
0x00000000
LCDCON2 Bit
Description
Initial
State
VBPD [31:24]
TFT: Vertical back porch is the number of inactive lines at the start of
a frame, after vertical synchronization period.
STN: These bits should be set to zero on STN LCD.
0x00
LINEVAL [23:14]
TFT/STN: These bits determine the vertical size of LCD panel.
0000000000
VFPD [13:6]
TFT: Vertical front porch is the number of inactive lines at the end of
a frame, before vertical synchronization period.
STN: These bits should be set to zero on STN LCD.
00000000
VSPW [5:0]
TFT: Vertical sync pulse width determines the VSYNC pulse's high
level width by counting the number of inactive lines.
STN: These bits should be set to zero on STN LCD.
000000