Lexmark 3455 - Manual (Page 111)

111
inactivity timer called the End-of-Job Timeout option. We will refer to both as the End-
of-Job Timeout. The default is 90 seconds. It is recommended that the End-of-Job
Timeout is disabled (set to 0) and the
DISCINTV is set to 15 seconds, if the printer
IPDS Timeout value is set to Host Controlled.
If the End-of-Job Timeout is greater than the DISCINTV value, errors are very likely
to occur if the printer requires user intervention. If, on the other hand, the End-of-Job
Timeout is smaller than the
DISCINTV value, an error is certain to occur the first time
the MarkNet card times out after a completed print job. Therefore, the End-of-Job
Timeout should be set to 0 (disabled).
The End-of-Job Timeout can be set with the MarkNet configuration procedure. Please
refer to the Lexmark Network Adapter User's Guide.
For activation timeout errors, set the connect timer or activation timer in the PSF
settings to 30 second or greater.