Lexmark 3455 User Manual
Page 122
122
Important:
On IPDS code level 8223 and above, the IPDS emulation may be
shared by IPDS hosts connected to the printer using the Adapter for
SCS (Coax or Twinax attachment) and IPDS hosts connected to the
printer using a MarkNet internal print server, or a MarkNet Pro
external print server, or MarkNet XLe. When sharing the printer
between these types of connections, the IPDS emulation will delete
downloaded resources from one host session before beginning
another session.
Example
IPDS resources have been downloaded during a session with a host
connected through the Adapter for SCS card (Coax or Twinax
attachment). These resources will be deleted by the IPDS emulation
when an IPDS job is received from a LAN attached host. When
another IPDS job is received through the Adapter for SCS card, the
printer will return a Printer Reset exception to the host. The host will
download the resources again with the next IPDS job.
On IPDS code level 8222 and below, the IPDS emulation cannot be
shared by IPDS hosts connected to the printer using the Adapter for
SCS (Coax or Twinax attachment) and IPDS hosts connected to the
printer using a MarkNet internal print server, or a MarkNet Pro
external print server, or MarkNet XLe. IPDS jobs will either be
accepted through the LAN connection or the Coax/Twinax
connection, but not both. If you try to share the IPDS emulation
between the connections, the printer will stop and display the
message Two IPDS Sources Recycle Power. The connection
through which the IPDS emulation first receives data will be the only
connection recognized by the SIMM for IPDS.
Note:
When using the Coax/Twinax Adapter for SCS in a printer with a
SIMM for IPDS installed, the Coax or Twinax Timeout value
overrides the IPDS Timeout value.