Lexmark 3455 - Manual (Page 71)

71
5 IPDS Job Cancel
The IPDS cancel function allows IPDS jobs to be canceled at the printer. Selecting a
specific job to cancel is difficult when several small jobs are queued to print from the
host. The job being printed may not be the job which is canceled. The cancel request is
returned to the host on the earliest possible page boundary. If all pages of a job have
been processed and stored in the printer’s memory, that job will not be canceled.
The IPDS cancel function may only be selected when an IPDS session is established
with a host. The IPDS cancel function will not be displayed during certain intervention
required conditions on the printer. The intervention must be cleared before the job can
be canceled.
The IPDS cancel function is only available on IPDS code level 8491 (or greater).
When attached to a host via Twinax, the Adapter for SCS must have Twinax code level
H02-8471 or greater for Cancel to be reported to the host. The message Cancel Not
Supported will be displayed if the Adapter for SCS does not support the cancel
function.
5.1 Canceling an IPDS Job
To cancel when IPDS appears on the display, press Stop, Stop, Select, and Go. An
explanation of what will occur with each key press follows.
1. Press Stop.
N
The printer displays Not Ready and continues to clear all paper from the
paper path. The printer stops receiving and processing data from the host.
You may proceed to Step 2 before the printer clears the paper path.
2. Press Stop again.
N
The message Press Select to Cancel IPDS Job is displayed.
N
The message Press Select to Cancel IPDS Job will not display during
certain intervention required messages. You must clear the printer
intervention first.