Lexmark 3455 - Manual (Page 54)

54
4.6 MAP INPUT TRAYS Menu Options
This option defines the mapping of the host's request for a physical feeder or input tray
in the printer. Any host input source can be mapped to any printer input source. The
printer input source is mapped to an IPDS host number. Input sources include the
envelope feeder, manual feed paper or manual feed envelopes.
Note: The optional printer input sources will only be displayed when installed on
the printer.
A typical relationship between IPDS numbers and the input sources would be:
Tray Map No. * Printer Input Source Value IPDS Number
Tray Mapping 1 Tray 1 0
Tray Mapping 2 Tray 2 1
Tray Mapping 3 Tray 3 2
Tray Mapping 4 Tray 4 3
Tray Mapping 5 Tray 5 4
Tray Mapping 6 Envelopes (Feeder) 64 (40H)
Tray Mapping 7 Envelopes (Manual) 64 (40H)
Tray Mapping 8 Manual Paper 99 (63H)
Tray Mapping 9 No Map -
Tray Mapping 10 No Map -
* The labels Tray Mapping 1 - Tray Mapping 10 refer to the number of the mapping,
not the physical tray.
Example 1
You may want to use one of the higher capacity input trays for IPDS 0. To swap the
IPDS number for Tray 1 and Tray 2, you will need to do the following:
1. Set Tray Mapping 2 for Tray 2 to IPDS 0.
2. Set Tray Mapping 1 for Tray 1 to IPDS 1.
This will give you:
Tray Mapping 1 = IPDS 1 mapped to Tray 1
Tray Mapping 2 = IPDS 0 mapped to Tray 2