6 printing ipds from psf/400 with os/400 v3r2 – Lexmark 3455 User Manual
Page 95
95
7.6 Printing IPDS from PSF/400 with OS/400
V3R2
Install the latest cumulative PTF fix pack or tape for the system.
N
PTF 41993, which is available from IBM, provides a fix for out of paper
responses from the printer.
1.
Set up and start the TCP/IP network:
N
Create a Token-Ring or an Ethernet line description for the printer
using
CRTLINTRN
or
CRTLINETH
.
N
Add a TCP/IP interface using
ADDTCPIFC
.
N
Add a router definition, if required, using
ADDTCPRTE
.
N
Start TCP/IP using
STRTCP
.
2.
Create a printer device description using
CRTDEVPRT
(see steps below and the
example on page 101).
Note:
Only the required fields are listed below.
At the command line, type:
CRTDEVPRT
and press <F4>. Enter the following
information:
Device description
OPTRA
(User defined name)
Device class
*RMT
Device type
*IPDS
Device model
0
Press <ENTER>