Lexmark 3455 - Manual (Page 47)

47
4.5.3 IPDS Envelope Paper
This option selects the envelope default formatting size for the IPDS Envelope media
source (most often it is the IPDS Number 64 (40H)). This option setting applies to
Input Tray Mappings set to "Manual Env" or "Env Feeder".
You can do one of the following:
N
Use the printer setting Manual Env Size.
N
Use the printer setting Env Feeder Size (if installed).
N
Select a different envelope size from the IPDS Menu. The selection applies
to both Manual Env and Env Feeder.
Selecting a specific size under the IPDS Menu will change the media size selected for
the Postscript and PCL emulations, too. It is recommended that the IPDS value remain
at the default of use Prtr Setting and the specific media size be selected under PAPER
SIZE from the printer's PAPER MENU.
Prtr (printer) Setting* Use the envelope size from the Manual Env Size or Env
Feeder Size printer default setting.
7 ¾ Envelope 7 ¾ Monarch envelope paper (3.875” x 7.5”)
9 Envelope 9 Commercial envelope paper (3.875” x 8.875”)
10 Envelope 10 Commercial envelope paper (4.125” x 9.5”)
DL Envelope DL envelope paper (110mm x 220mm)
C5 Envelope C5 envelope paper (162mm x 229mm)
B5 Envelope B5 envelope paper (176mm x 250mm)
Other Envelope The Other Envelope setting enables the use of non-
standard envelopes. The media size returned to the host is
specified with IPDS menu option Other Env Size. Refer to
section 4.5.8 Other Env Size on page 53 for more
information. The default media size returned to the host is
215.9 x 355.6 mm (8.5 x 14.0 in.). The position of the
printed data has to be adjusted by the host or by the print
application. This is necessary as the IPDS starting position
(0,0) often will be outside the physical paper. How the
printed data has to be adjusted, depends on which envelope
edge is printed first. Refer to the figure below matching
your printer.