Lexmark 3455 - Manual (Page 49)

49
4.5.4 IPDS Manual Paper
This option selects the default formatting paper size for the IPDS Manual media source
(most often it is the IPDS Number 99 (63H)). This option setting applies to the Input
Tray Mappings set to "Manual Paper".
You can do one of the following:
N
Use the printer setting “Manual Pap Size”.
N
Select a different paper size for IPDS.
Selecting a specific size under the IPDS Menu will change the media size selected for
the Postscript and PCL emulations, too. It is recommended that the IPDS value remain
at the default of use Prtr Setting and the specific media size be selected under PAPER
SIZE from the printer's PAPER MENU.
Prtr (printer) Setting* Use the paper size from the “Manual Pap Size” printer
default setting.
Letter Letter paper size (8.5” x 11.0”)
Legal Legal paper size (8.5” x 14.0”)
B5 (JIS) B5 (JIS) paper size (182mm x 257mm)
A4 A4 paper size (210mm x 297mm)
Executive Executive paper size (7.25” x 10.5”)
A5 A5 paper size (148mm x 210mm)
Universal This setting allows the use of non-standard paper sizes.
The media size returned to the host is specified with IPDS
menu option Universal Size. Refer to section 4.5.7
Universal Size on page 52 for more information. The
default media size returned to the host is 215.9 x 355.6 mm
(8.5 x 14.0 in.). If printing occurs after the length of the
physical paper, the message 34 Short Paper is displayed
in the operator panel.
Note: Universal paper support is only available on IPDS code level 9241 and
above.